bitumen 85/35

Home » oxidized bitumen » Modified oxidized bitumen 85/35

bitumen 85/35

General description of bitumen 85/35

 Oxidized Asphalt is a asphalt binders called roofing bitumens. Most commonly used of bitumen 85/35 is to avoid flowing or any degradation (flowing, braking, melting, etc.) during use caused by weather conditions (rains, sun heat, and the like), fumes, oils, solvents and vapors thereof.

Uses of bitumen 85/35

Oxidized bitumen 85/35 uses in the chemical, fuel, paints, lacquers, varnishes, paper-pulp-board, textile processing, road construction, pavement ,crack seal and repairmen, civil works, roofing, construction industries; sealing and insulating buildings, adhesive, construction materials additive, dust-binding, coating, insulating and impregnating agent, make rubber and plastic products. The blown asphalt 85/35 products are for paving, roofing; also used in asphalt based paints for corrosion protection of metals, in lining public works structures, adhesives in electrical laminates, base for synthetic turf; typical uses for oxidized asphalt 85/35 include roofing, pipe coating, Portland cement pavement, hydraulic applications, paint manufacturing.

Packing of blown asphalt 85/35

The ATDM is manufacturer of blown asphalt 85/35 in various packing including kraft bag, meltable plastic bag, drum and bulk blown asphalt 85/35 from penetration grade bitumen, which is blown by hot air in a controlled process until the desired specification is reached. The ATDM oxidised 85/35 can be supplied in any grade and are designated by two numbers to indicate the softening point and penetration ranges. The oxidized asphalt grade 85/35 means softening point is 85°c and penetration is 35 desimillimiter is produced in compliance and conformity to ASTM standard and meets the following specification.

Guaranty/warranty of blown bitumen 85/35

ATDM guaranty the quality of 85/35 with arrangement of international inspector to check quality and quantity of the Oxidized Asphalt on each shipment during the loading to vessel and controlling the production by qc team via batch test report before shipping. ATDM guaranty the quality to meet with ASTM/EN 13304:2009.

Analysis of 85/35

Bitumen 

Specification

Test method ASTM/EN13304

Specific gravity @ 25/25 cg

1.01/1.06

D-70

Penetration @ 25 c

30/40

D-5

Softening point c

80/90

D-36

Loss on heating(wt) %

0.2 Max

D-6

Flash point c

250 min

D-92

Solubility is CS2(wt) %

99.5 Max

D-4

Spot test

negative

A.A.S.H.O.T102

Specification of Oxidized Bitumen 85/35

bitumen 85/35

MSDS of Oxidized Bitumen 85/35

MSDS of Bitumen 85/35

Open chat
Hello
Can we help you?