MSDS of bitumen primer
Bitumen Primer Safe Use and Industrial Guide for UAE and Turkey | Basekim Insights
Introduction: Understanding Bitumen Primer
To begin with, bitumen primer is a powerful bonding agent used before applying waterproofing systems on surfaces like concrete, wood, or metal. In particular, construction companies in the UAE and Turkey use this material to protect against water damage in harsh climates. As a result, Basekim offers high-quality bitumen primers designed to perform reliably under extreme weather and structural stress.
Bitumen Primer Composition and Key Ingredients
Specifically, Bitumen paint primer consists of:
White Spirit (60–70%): a petroleum-based solvent
Bitumen (30–40%): a sticky, waterproof binding agent
Consequently, this combination ensures deep penetration and strong adhesion to various substrates.
Physical and Chemical Properties of Bitumen Primer
Importantly, the product appears as a black liquid with a strong petroleum odor.
Additionally, it has a flash point of 40°C, making it flammable under certain conditions.
Moreover, the density is around 1.0, and it is insoluble in water, which helps protect surfaces from moisture.
Health and Safety Hazards of Bitumen Primer
Undoubtedly, solvent-based bitumen poses several health risks if handled carelessly.
For instance, inhalation of fumes may cause dizziness or headaches.
Furthermore, skin contact can lead to dryness, irritation, or even dermatitis over time.
First Aid Measures
Thankfully, following basic first aid procedures can reduce health risks.
In the event of inhalation, move the person to fresh air immediately.
In case of skin contact, use skin cleanser followed by water and soap.
If it gets in the eyes, rinse for at least 15 minutes.
Should ingestion occur, seek medical help without inducing vomiting.
Fire and Explosion Hazards
Notably, black bitumen primer is highly flammable due to its white spirit content.
Therefore, you should only use dry powder, CO₂, or foam to extinguish fires.
In contrast, never use water jets, as they can cause splashing and spread the flames.
Additionally, firefighters must wear protective clothing and breathing equipment.
Environmental Impact and Spill Management
Equally important, bitumen primer can harm aquatic life and disrupt ecosystems.
Because of this, any spills must be absorbed using inert materials like sand, sawdust, or earth.
Also, prevent the product from entering drains or natural water sources.
Handling and Storage Guidelines
Generally speaking, proper handling and storage minimize the risk of accidents.
Always use the product in well-ventilated areas and away from heat or flames.
Similarly, store containers under cover and out of direct sunlight.
Moreover, tightly seal the containers when not in use.
Personal Protective Equipment (PPE)
Consistently, wearing the correct PPE ensures safe usage of bitumen primer.
Wear chemical-resistant gloves, protective clothing, and safety goggles.
Also, use a mask or respirator when working in poorly ventilated areas.
Legal and Regulatory Compliance
According to international safety codes, bitumen primer is labeled as:
R10: Flammable
R65: Harmful if swallowed
R66: May cause skin dryness
R51/53: Dangerous to aquatic life
Likewise, safety precautions include:
S2: Keep out of reach of children
S29/S56: Don’t empty into drains
S46: Seek medical help if swallowed
S51: Use in well-ventilated areas
S61: Avoid environmental release
Disposal and Waste Management
Fortunately, safe disposal practices are well-documented.
Both the product and container must be treated as hazardous waste.
Therefore, follow your local and national disposal regulations strictly.
Additionally, work with licensed waste management companies for compliance.
Transport Information
Similarly, transporting bitumen primer requires awareness of hazard classifications.
It falls under UN No: 1999 (Liquid Tars), Class 3, Packaging Group III.
Consequently, ensure packaging is secure and labeled during transport.
Industrial Applications in UAE and Turkey
Undoubtedly, the hot climates in the UAE and Turkey demand premium waterproofing solutions.
As a result, Basekim’s bitumen primer is widely used in:
Roof waterproofing
Pipeline protection
Bridge and road foundations
Basement and tunnel sealing
Moreover, its quick-drying and adhesive nature make it ideal for fast-paced projects.
Why Choose Basekim?
Notably, Basekim is a trusted manufacturer and supplier of bitumen primer across Turkey and the UAE.
In fact, the company is known for:
Quality control and product consistency
Fast local distribution
Technical support and safety compliance
Custom packaging options
Therefore, construction firms prefer Basekim for both large-scale and residential projects.
Application Instructions
To ensure optimal results, prepare the surface by cleaning and drying it first.
Then, apply bitumen primer with a brush, roller, or spray.
Afterward, allow the surface to dry completely before laying waterproof membranes.
Typically, drying time is 2–4 hours, depending on climate and surface type.
Closing: Smart Construction Starts with Safety
All things considered, bitumen primer is an essential part of modern waterproofing systems.
Although it carries fire and health hazards, these are easy to manage with proper training, PPE, and Basekim’s support.
Ultimately, whether in Turkey or the UAE, safe construction starts with trusted products—and Basekim delivers just that.
Final Checklist for Bitumen Primer safety
✔ Use in open, ventilated areas
✔ Avoid skin and eye contact
✔ Store away from sunlight and heat
✔ Follow fire safety protocols
✔ Wear PPE: gloves, goggles, mask
✔ Dispose of properly as hazardous waste
✔ Buy only from reliable sources like Basekim
Our approvals
